News  
trafilatura, wire drawing, trefilage, trefilado
 
         
 
Press room
Press room - Categories
Exhibitors news (72) Fair update (20)
International news (225) Magazines and cooperations (1)
Weekly events


Archived news


Forum


Engineering


Polls


USA: Nucor seeks permit for $2 billion mill
Inserted on 16 05 2008 by dimaggio. EN - International news
Site URL : www.industryweek.com


Nucor seeks permit to build Louisiana plant.

Company aims to control raw materials sources with new pig iron facility.


Steel recycling giant Nucor Corp. plans to invest at least $2 billion in a new Louisiana pig iron facility that could create up to 750 manufacturing jobs pending state permit and company board approval, the company said May 15.

If approved, the facility would be located in St. James Parish, about halfway between New Orleans and Baton Rouge on the Mississippi River. The company plans to build the plant in two phases, with the second phase costing an additional $1 billion to construct a 3-million-ton blast furnace. Nucor also would build a new high-capacity port on the river capable of handling ocean vessels and coal and pig iron barges.

Comments : 0 | More... (179 words)
R.T.P. Paganoni: quality guaranteed
Inserted on 14 05 2008 by dimaggio. EN - Exhibitors news
Site URL : R.T.P.


R.T.P. Paganoni: guarantees of quality.


For years, our company has been engaged in finding the most satisfactory solutions to the problems of our clients in the field of wear-resistant materials.
The company's primary aim is to offer products with exceptional properties of resistance to wear, abrasion and corrosion, while attempting to combine high quality with reasonable prices.

Our quality is guaranteed:

DIAMOND 2000 COATING
TECHNICAL CHARACTERISTIC AND MICROSCOPICAL TEST
Surface hardness: HRC 61.0 - 63.0 - 56.0
Coating Thickness: 0.8 - 0.6 mm
Distance from surface: 0.05 mm 890 HV
0.10 mm 926 HV
0.20 mm 1100 HV
Tungsten Carbide hardness: HRC 75.0
Hardness in section: HV 0.300 g
Enlargement: 50x

Comments : 0 | More... (121 words)
Malaysia: long-awaited liberalisation of domestic steel industry finally becomes reality
Inserted on 12 05 2008 by dimaggio. EN - International news
Site URL : Thestar


Malaysia: government liberalises steel industry.
By YEOW POOI LING

The long-awaited liberalisation of the domestic steel industry has finally become a reality.

In a statement yesterday, Prime Minister Datuk Seri Abdullah Badawi said the Government had decided to remove the domestic ceiling price for steel bars and billets and allow importers to be exempted from import licensing and paying import duty.

Comments : 0 | More... (395 words)
Carlo Salvi will be present at the International Mechanics Fair in Brasil
Inserted on 10 05 2008 by dimaggio. EN - Exhibitors news
Site URL : Carlosalvi


Carlo Salvi informs...

Carlo Salvi informs all his customers that will attend the following fair:

13/17 May 2008
Feira Internacional da Mecanica
Pavilhão de Exposições do Parque Anhembi - São Paulo
Booth E32

Comments : 0 | More... (16 words)
US: House authorizes use of cheaper metals in coins
Inserted on 09 05 2008 by dimaggio. EN - International news
Site URL : www.boston.com


The price of a penny stirs calls for steel.

WASHINGTON - The House has voted to bring back the steel penny, saying it would be cheaper to make. Currently, the government loses money on every one-cent coin it makes because of rising metal prices.

The bill would direct the Mint to begin producing, within nine months, pennies made out of copper-plated steel - not the zinc-copper alloy currently used. The measure also recommends the phasing in of steel nickels over the next two years.

Comments : 0 | More... (189 words)
Trafilerie Vavassori. Wire experts.
Inserted on 07 05 2008 by dimaggio. EN - Exhibitors news
Site URL : Trafilerievavassori


Trafilerie Vavassori: from past to future.

At the beginning of the ‘60s, Alfredo Vavassori started producing plastified and galvanised wide-meshes, to which he added the commercialisation of annealed iron wire, galvanised wire, nails and a series of articles for enclosures and for the building sector.

At present, the company produces drawn wire, galvanised wire, black and white annealed wire, bright drawn wire in packages of 5 kg up to skeins of 1000 kg, bright, electrolytically and hot galvanized nails in any size, plastified wire in different packages from 10 meters for the bricolage to skeins of 500 kg for industrial use, and galvanised or plastified wide-mesh.

Comments : 0 | More... (56 words)
India's Tata Steel eyes Indonesia's Krakatau
Inserted on 05 05 2008 by dimaggio. EN - International news
Site URL : afp.google.com


Tata eyes stake in Indonesia's Krakatau Steel.

India's Tata Steel could bid for a stake in Indonesia's largest steel maker PT Krakatau Steel, according to a report here Saturday.

"Tata (Steel) has also expressed their interest in finding out more details in the Krakatau Steel privatisation," the industry ministry's director general for metal, Ansari Bukhari, told state-run news agency Antara.

Comments : 0 | More... (135 words)
PONZIANI S.P.A.: our quality is tested
Inserted on 02 05 2008 by dimaggio. EN - Exhibitors news
Site URL : www.ponziani.it


PONZIANI S.P.A.: our quality is tested.

Cold drawn and patented steel wire, in low medium and high carbon content phosphated, white or white brillant surface, galvanized wire, rollable wire and shaped wire: all the products are rigorously tested. Each wire coil is tested with a twist spiralling and winding test.

Our test certificate conforms to specification EN 10204-3.1.B and it reports the following information:

· Nominal diameter / Real diameter
· Breaking load and tensile strength
· Specification
· Class
· Chemical Analysis
· Torsion test
· Twist test
· Customer order

Comments : 0 | More... (38 words)
Chavez ready to expropriate steel maker
Inserted on 28 04 2008 by dimaggio. EN - International news
Site URL : ap.google.com


Chavez threatens to expropriate steel maker Sidor.
By CHRISTOPHER TOOTHAKER

President Hugo Chavez threatened on Sunday to expropriate Venezuela's largest steel maker due to what he said are the soon-to-be-nationalized company's excessive compensation demands.

Chavez said he could not help but laugh when he heard that Sidor's parent company, Luxembourg-based Ternium SA, is asking for at least US$4 billion (euro2.56 billion) in compensation for its 60 percent stake in Sidor.

Comments : 0 | More... (227 words)
A new millenium for Brambilla
Inserted on 26 04 2008 by staff. EN - Exhibitors news
Site URL : Traf. BRAMBILLA


A new millenium for Brambilla

Thanks to its dynamic sales network and its tightly knit, highly motivated staff, TRAFILERIE BRAMBILLA SpA today is ready to meet the challenges of the new millennium, giving particular attention to environmental issues, while targeting Customers who are looking for a partner they can grow together with, sharing choices, decisions and results.

Comments : 0 | More... (69 words)
India's Finance minister: steel producers behave like cartels
Inserted on 25 04 2008 by dimaggio. EN - International news
Site URL : timesofindia.indiatimes.com


India: steel and cement firms acting like a cartel, says FM.

Finance minister P Chidambaram on Tuesday again attacked cement and steel manufacturers saying they were acting like a cartel and warned that the government was looking at measures to deal with them to contain inflation.

Comments : 0 | More... (70 words)
VAN-DIES: new ABU profile
Inserted on 23 04 2008 by vandies. EN - Exhibitors news
Site URL : www.vandies.it


VAN-DIES: new ABU profile

VAN-DIES is proud to present the new ABU profile,the last revolution of Albino Vanossi in cold-drawing.ABU is for ANTI BREAKING-UP and assures extraordinary performances about duration and speed-drawing.

Best regards from VAN-DIES staff.


Comments : 0 | More... (0 words)
Report: copper will evade price drops in next years
Inserted on 21 04 2008 by dimaggio. EN - International news
Site URL : money.cnn.com


Copper to evade large price drops in next 2 years.

Copper prices will evade large drops in price for the next two years or even longer because of supply disruptions and delays to planned projects, Macquarie said in a report Monday.

Aside from disruptions because of strikes and maintenance at operations running at or close to capacity, increasing government demands for higher royalties and profit taxes or greater stakes in projects are hampering development in many areas, the bank said.

Comments : 0 | More... (371 words)
IISI says 2008 will be strong year for steel industry
Inserted on 16 04 2008 by dimaggio. EN - International news
Site URL : Reuters


IISI reports: world steel demand to grow 6.7 pct in 2008.

World steel demand will grow by 6.7 percent year-on-year to 1.28 billion tonnes in 2008, research group the International Iron and Steel Institute said on Monday.

This would be a record for steel use, industry data show.

Comments : 0 | More... (224 words)
China's steel exports boost in March
Inserted on 14 04 2008 by dimaggio. EN - International news
Site URL : Chinaknowledge


China's steel exports up 1.05 mln tons in March.

China's steel exports in March surged 1.05 million tons month-on-month to 4.16 million tons, driven by the widening price gap between domestic and international markets, which extends to US$100 to US$200 per ton.

The exports in March were also boosted by the undelivered goods in the previous month and the tax rebate abolition for the exported energy-consuming goods was beginning to pay off, according to industry expert Xu Xiangchun, who expected more tightening policies to put out if monthly exports surpass 400 tons.

Comments : 0 | More... (96 words)
Government confirms Ternium Sidor nationalization
Inserted on 12 04 2008 by dimaggio. EN - International news
Site URL : www.presstv.ir



Chavez nationalizes largest steel mill.

The largest steel mill in Venezuela, Ternium-Sidor is to be nationalized, according to a presidential decision made following yet another strike closure.
Ternium-Sidor, which is sixty percent owned by Argentineans was not able to reach an agreement with unions on wages. When the work force went out on strike President Hugo Chavez ordered its nationalization.


Comments : 0 | More... (208 words)
Duesseldorf WIRE & TUBE + METAV 2008: a succeeding fair for the online fair.
Inserted on 07 04 2008 by staff. EN - Fair update
Site URL : Wiredrawing



Duesseldorf WIRE & TUBE + METAV 2008: a succeeding fair for the online fair.

wiredrawing.netLecco, 7th April 2008 - Three days ago WIRE & TUBE + METAV 2008, the greatest international appointment of the field, came to a conclusion. As we announced, wiredrawing.net’s staff was present, too, with a stand of its own in pavilion 13.

Far more than expected, the project aroused the interest of an enormous amount of visitors. Our staff distributed 30,000 pens and leaflets signed wiredrawing.net, increasing therefore considerably the notoriety of the website and the traffic of the last and the next days. On the “new business” side, we have directly contacted more than 300 companies, all operating in the field. Our staff had the chance to illustrate them the website in all the details, in all its potentialities.


Comments : 0 | More... (526 words)
Excellent success for wire and Tube + METAV 2008
Inserted on 07 04 2008 by dimaggio. EN - International news
Site URL : Wiredrawing


Wire & Tube + METAV 2008 press release: "excellent success" for the fair.

Düsseldorf, 04 April 08 - Euphoric mood in the exhibition halls, full order books and the outlook for excellent post-fair business – the two number one trade fairs, wire, International Wire and Cable Trade Fair, and Tube, International Tube Trade Fair, ended on a high note. “Every two years, Düsseldorf becomes the international meeting point for specialists from the wire, cable and tube industry. Here, they can meet face to face and fill their order books,“ Werner Dornscheidt, Chairman of the Management Board of Messe Düsseldorf, is pleased with the results.

Comments : 0 | More... (743 words)
PROMILLS: Rolls and modular Rolling Cassettes for all application and for all wire drawing lines.
Inserted on 03 04 2008 by staff. EN - Exhibitors news
Site URL : Promills


PROMILLS: Rolls and modular Rolling Cassettes for all application and for all wire drawing lines.

Since many years the rolling cassettes have been introduced in the wire plants. Today they are commonly used for a wide range of applications. They often allow either to overpass the limits of the classic die wire drawing or to suit new products through new methods. Even though the purpose is always the cold shaping of the metallic wire sections, they use rolls instead of classic dies.
Despite of the exceptions that could be moved around the use of the rollling cassettes, it is undeniable they represent now a reality together with and the advantages that can be drawn.

In this context, the italian company PROMILLS specializing in the cold shaping of the metallic wire sections and thanks to a multi-decennial experience in the field of the cold roll forming and drawing process, has developped and set-up a design system that allows to obtain a very wide range of rolling cassettes by using just a few standardized components.

PROMILLS trough his MODULAR SYSTEM is able since several years to fit into either old or brand new drawing lines the right standard or upon request rolling cassette. Up today more than 50 models of standard or special rolling cassettes have been put in operation and we can estimate that under the same system it is possible to built up more than hundred different standard models or configurations (theoretically 361 excluded special models).
In the light of what above it is quite sure that it is possible to operate in order to build a sequence of rolling groups to suit any kind of wire profile within a range of round equivalent diameters of 1-16 mm.

Each rolling cassette is made of 1 or 2 groups of rolls. Each group can have 2, 3 or 4 rolls within an range of outer diameter from 80 to 210 mm. The following table shows some possible combinations of homogeneous rolling groups:


 


Comments : 0 | More... (348 words)
Nippon Steel to build mill in Brazil
Inserted on 25 03 2008 by dimaggio. EN - International news
Site URL : afp.google.com


Nippon Steel to build new facility in Brazil.

Japan's Nippon Steel Corp. plans to build a new production facility in Brazil amid stiff competition with rivals such as ArcelorMittal in fast-growing economies, a report said Tuesday.

Japan's biggest steelmaker Nippon Steel expects to spend between 500 and 600 billion yen (5.0-6.0 billion dollars) on the mill in the southeastern city of Cubatao, the Nikkei business daily said without citing sources.

Comments : 0 | More... (200 words)
wiredrawing.net becomes terrestrial in Düsseldorf
Inserted on 25 03 2008 by staff. EN - Fair update
Site URL : Wiredrawing


WIRE & TUBE 2008 + METAV Düsseldorf
The virtual fair becomes terrestrial, for 5 days.

LECCO - We are happy to announce that this year wiredrawing.net will be present at the WIRE & TUBE 2008 + METAV Düsseldorf fair, with one exhibition stand of its own (pavilion 13 in the position d93).

A space that will act as a connection point for the visitors interested in knowing the project, but also as an internet point for all those present at the fair. Our stand will be equipped with 2 big screens (see figure), where all the logos of our exhibitors will rotate, and of 4 internet positions, always connected to the online stands of the network.


WIRE & TUBE 2008 + METAV Duesseldorf

Given our presence in Duesseldorf, we advise all the companies that wish to extend their visibility on international scale to reserve an online stand on wiredrawing.net, blocking the best positions inside each pavilion (our contacts: email dimaggio@wiredrawing.net fax +39 0341 581141). We remind that there is always place for everyone in wiredrawing.net, but the best positions in the pavilions are given to those who arrive first, just like in a real fair.

Comments : 0 | More... (151 words)


«Prev.
16 05 2008
Archived news  


 
Log in
Login
Password
Save your data:
Don't have a wire-drawin.com! ID?
Signing up is easy.

Sign Up



Exposers

RESTAMP s.r.l

Mollificio Luigi Codega s.r.l.

Tecnofil S.p.A.

Defremm S.p.A.

Eredi Mario e Antonio Airoldi s.a.s

TECNOPRESS s.r.l.

METALFILI TRAFILATI srl

ACRA Srl

Trafilerie Manzoni Srl

MCS MOLLIFICIO COMINO E STUCCHI S.R.L.

Leccovende Srl

B&V Group

EUROLLS Spa

Metallurgica Locatelli S.p.A.

M.P. METAL PLAST COMPONENTS Srl

VALSECCHI ORAZIO & C. s.r.l.

VINCIT di Leidi Carlo & C s.n.c.

AMBROGIO TENTORIO s.a.s

Mollificio Lecchese srl

ENDEREZADOS GOIAHEN S.L.

MF CATENIFICIO Frigerio Mario & figlio snc

DEM Wire Rolling Technology

Moroni s.r.l.

Miraglia Macchine S.r.l.

Generaltubi S.p.A.

PMA Srl

CMT mollificio Srl

GALVANIZADOS VITORIA S.A. "GALVISA"

CORTINOVIS S.p.A

LOCATELLI GIOVANNI srl

OMD Mollificio s.a.s.

P.Tre S.r.l.

Team Meccanica SPA

Vitari S.p.A.

Giuseppe & F.lli BONAITI S.p.A

MICROMOLLE di D’Agostino ing. Vladimiro & C. snc

TRAFILERIA ARCOFIL di Tentori & C. snc

MOLLIFICIO NEGRI S.r.l.

Carlo Salvi S.p.A.

MOLLIFICIO GIEMME Snc

TECNOGIVI Automazione & Informatica

E. PONZIANI S.P.A. Industria acciai trafilati

DEMA Software s.a.s.

Microstudio s.a.s.

OMAG di Affri Davide & C. s.a.s.

PAGANONI (Division of MARIO NAVA SPA)

ATM s.r.l.

Example stand - wiredrawing.net

VAN-DIES

EME Elettromeccanica Erbese Srl

SPREAFICO s.r.l.

Dell'Oro Compressori

Redies S.R.L.

R.T.P. PAGANONI SRL

Promills srl

TRAFILERIE VAVASSORI srl

EASYDUR ITALIANA di Renato Affri

TRAFILERIA SCERELLI s.r.l.

EUROCARBIDE SRL

Trafilerie Fratelli Rotta s.n.c.

GMP - Slovakia

Vassena filiere srl

PAN CHEMICALS S.p.A.

SAS ENGINEERING AND PLANNING

Trafilerie San Paolo srl

TRAFILERIA LECCHESE s.r.l.

Wire Drawing Technologies WDT S.r.l.

S.E.I. srl - Servizio Elettronica Industriale

Trafilerie Malavedo Srl

COMAPAC WIRE MACHINERY

VARO s.r.l

GIMAX s.r.l.

Trafilerie di San Giovanni S.p.A.

IMAS srl

ORI MARTIN S.p.a.

Lubrimetal S.p.A.

FAR S.p.a.

Trafileria Lariana S.p.A.

Tecno Impianti S.r.l.

OMF Officina Meccanica Frigerio S.R.L.

Fuchs Lubrificanti S.p.A.

DANIELI CENTRO MASKIN

ITA S.p.a.

MINUTERIE METALLICHE s.a.s

Chemetall Italia S.r.L.

TRAFILERIE BRAMBILLA S.p.A.

TMI S.r.l. TRAFILERIA FERRO ACCIAIO

Tramev Srl

SIEI SISTEMI s.r.l.

CB Trafilati Acciai S.p.A.

Mario Frigerio S.p.A

Interactiveness

World news

Link

Maps

Translations

Flights

Engineering IT



Steel (STLD)



Visitors
Current visitors : 20
Membri : 0
 


This page has been loaded in 1.09375seconds.

Archived news Archived news | Printable version Printable version



 

Feed Rss|trafilatura, wire drawing, trefilage, trefilado Add to favourites | trafilatura, wire drawing, trefilage, trefilado Set up as Home Page

Copyright © 2004-2008 www.wiredrawing.net - Staff - All rights are riserved..